SEPTIC INSTALLATION & REPAIR
Septic Services Rooted in Compliance, Care, and Quality
​
Septic installation and repair are critical components of any property, requiring strict adherence to North Carolina regulations and a deep understanding of the land.
At Elite Property Solutions, we prioritize your property's needs while ensuring full compliance with state laws and environmental standards. Our team guides you through the complexities of septic systems, from permits to installation and repairs, with a focus on educating our clients every step of the way. We assess each site meticulously, planning and executing solutions that are safe, reliable, and sustainable. With our expertise, you can trust that your septic system will be handled with the utmost care and professionalism, protecting both your property and the environment.
SEPTIC PERMITTING
NORTH CAROLINA SPETIC PEMITTING
North Carolina, the septic permitting process involves several key steps and permits. The first step is obtaining an Improvement Permit (IP), which determines the feasibility of a septic system based on the site's soil and other conditions. This permit is crucial as it sets the groundwork for the type of septic system that can be installed.
​
Once the IP is approved, the next step is applying for a Construction Authorization (CA). The CA permit allows the septic system to be constructed on the site, provided all requirements set out in the IP and state regulations are met. It outlines system type, layout, installation, and maintenance requirements and must be obtained before construction begins. This permit can be valid for up to 60 months, but it's the property owner's responsibility to ensure it is acquired and remains valid during the construction process.
​
After the system is installed, an Operations Permit (OP) is needed before the septic system can be used. This involves an inspection to ensure compliance with the IP, CA, and state laws. The OP is required for the system to receive a Certificate of Occupancy from the building inspector. It includes the system's performance, operation, and maintenance requirements.
​
For more information on the permitting process and specifics, you can refer to resources provided by the NC Department of Environmental Quality and county health departments.
SEPTIC INSTALLATION
Site Evaluation and System Design
The process begins with a site evaluation conducted by a Licensed Soil Scientist (LSS) or an Authorized On-site Wastewater Evaluator (AOE). They assess the soil conditions, topography, and other factors to determine the best type of septic system for the property. Based on this evaluation, the LSS or AOE designs a septic system that meets the requirements for treating and dispersing wastewater on-site effectively. The design will include details like the size and layout of the system, considering factors such as soil permeability, lot size, and distance from water sources.
Permitting
Once the system is designed, the property owner or a licensed septic contractor must apply for the necessary permits. The first permit required is the Improvement Permit (IP), which is issued after the site evaluation confirms that a septic system is feasible for the property. After the IP is granted, the property owner applies for the Construction Authorization (CA), which permits the actual installation of the system. The CA will outline specific conditions and requirements for the installation, such as system layout, installation methods, and maintenance guidelines.
​
Installation
With the CA in hand, the septic system installation can begin. The installation must be carried out by a licensed septic contractor who follows the design specifications and state codes to ensure the system operates correctly and safely. During this phase, the contractor will excavate the site, install the septic tank and drain field, and ensure that all components are correctly placed according to the approved design.
​
Inspections and Final Approval
After the system is installed but before it is covered, an inspection by the county health department or a certified inspector is required. This inspection ensures the system was installed according to the design and meets all regulatory requirements. If the system passes inspection, the property owner is granted an Operations Permit (OP), allowing the system to be used. This final step is crucial as the OP must be in place before the property can receive a Certificate of Occupancy.
Who is Responsible for Each Step?
- Design: A Licensed Soil Scientist (LSS) or Authorized On-site Wastewater Evaluator (AOE) designs the septic system.
- Permitting: The property owner or septic contractor typically pulls the necessary permits from the local county health department.
- Installation: A licensed septic contractor is responsible for installing the system according to the approved design.
- Inspection: The county health department conducts the final inspection before issuing the Operations Permit.
This comprehensive approach ensures that septic systems in North Carolina are installed safely, effectively, and in compliance with all state laws and regulations.
SEPTIC REPAIR
Site Assessment and Diagnosis
The septic repair process in North Carolina begins with a thorough assessment of the existing system. This involves a site evaluation by a Licensed Soil Scientist (LSS), Authorized On-site Wastewater Evaluator (AOE), or a certified septic inspector to diagnose the problem. They will examine the system's components, including the tank, drain field, and any visible signs of malfunction, such as backups, leaks, or drainage issues. The goal is to identify the root cause of the problem, which can range from tank damage to drain field failure.
Permit Requirements
Once the issue is identified, the next step is to obtain the necessary permits for the repair. The property owner or the licensed septic contractor must apply for a Septic Repair Permit through the local county health department. This permit ensures that the proposed repair plan complies with state regulations and that the repaired system will operate safely and effectively. The application process may require submitting detailed information about the existing system and the proposed repair plan.
System Repair
With the repair permit approved, the licensed septic contractor can proceed with the necessary repairs. The scope of the repair can vary significantly depending on the problem. Common repairs include replacing damaged pipes, repairing or replacing the septic tank, and restoring or replacing the drain field. The contractor must follow the approved repair plan and adhere to North Carolina's septic system regulations to ensure the repair is effective and long-lasting.
Inspection and Approval
After the repair work is completed, an inspection by the county health department is required before the system can be put back into operation. This inspection verifies that the repair was conducted according to the approved plan and meets all current state and local regulations. If the inspection is successful, the county health department will provide final approval, allowing the system to resume normal operation.
Who is Responsible for Each Step?
- Assessment: A Licensed Soil Scientist (LSS), Authorized On-site Wastewater Evaluator (AOE), or certified septic inspector conducts the initial diagnosis.
- Permitting: The property owner or septic contractor applies for the necessary septic repair permits.
- Repair: A licensed septic contractor carries out the repairs in compliance with the approved plan.
- Inspection: The county health department inspects the repair to ensure compliance with state regulations before granting final approval.
By adhering to this structured process, septic repairs in North Carolina are conducted safely, effectively, and in accordance with state laws, helping to maintain the health and safety of the property and the surrounding environment.
